VESTEK Support | Service Menu

Service Menu

Service Menu

Service Menu contains hidden information about the client’s software and hardware. All submenus could be selected via Up/Down keys and displayed by pressing OK key. When a submenu is displayed, top-level service menu disappears. Pressing Return key goes back to the one level upper menu. Pressing Menu key will exit the service menu. The service menu diagrams could be seen for MB230 TVs in Figure 1. Items in Service Menu are described in Table 1. Service menu remote control shortcuts for each client are described below.

  • MB110 / MB120 / MB120DS / MB130VS / MB135VS:Menu+4725
  • MB230: “Key_DOWN + Volume_UP + Program_UP + Volume_DOWN + Program_DOWN”

Figure 1: Service Menu

Video Settings• RF AGC SECAM
• RF AGC NEIGHBOUR NO IMAGE NO
• RF AGC NEIGHBOUR NO IMAGE YES
• RF AGC NEIGHBOUR YES IMAGE NO
• RF AGC NEIGHBOUR YES IMAGE YES
• RF AGC TEST
Audio Settings• Surround Type
• Surround Mode Text
Options 1• Power Up Mode
• Hotel Mode
• Stby Search
• Test Tool
• Local Key
• Volume Level
Options 2• Aps Sorting
• Dynamic Menu
• Auto Zoom Mode
• EPG Menus
• Transparent Text
• HDMI Number
• Rc Type
• DCF ID
• Touchpad Sw Version
• Video Wall ID
Options 3• HBBTV
• Portal
• PVR
• Wifi
• Customer
• Cable Support
• Satellite Support
• DSmart
• Digiturk
• Orf
• Astra HD+
• Virtual Remote
• Follow Tv
• Open Browser
• Digital IB
• SDT Service Addition
Tuning Settings• Tuner Type
• Tuner Firmware Version
• Tuner Build Number
• Tuner T2 Demod FW
Source Settings• EXT1
• EXT1 RGB
• EXT1-S
• EXT2
• EXT2 RGB
• EXT2-S
• SIDE AV
• S-VIDEO
• HDMI1
• HDMI2
• HDMI3
• HDMI4
• YPbPr
• VGA/PC
• BlueRay
• DVD
• Intel WiDi
• APM
• IP Camera
Diagnostic• Remote control test
• UHF test
• VHF test
• Factory reset
• Tuner I2C
• DVB-T2 Demod I2C
• EDID status
• HDCP status
• HDCP 2.0 status
• DDR Settings
• CI+ credentials
• MAC address
• USB Logging
• UARTrx
USB Operations

Press this button to perform USB operations.(Upload/download nvram data, upload/download hw/sw profiles)

USB stick should be connected before this operation. If USB hub is used the last plugged USB is used for this purpose.

Table 1: Menu Diagram